MOT failure data · 2025

Peugeot 3008 Allure MOT problems

Across every Peugeot 3008 Allure that failed its 2025 MOT, the defect testers recorded most often was tread depth tread depth below requirements of 1.6mm, on 26.08% of failure items. The broadest problem area was tyres at 42.19%. These are recorded defects across the model, not a diagnosis of any one car.

Most common Peugeot 3008 Allure MOT failures

#Recorded defect AreaShare
1 Tread depth tread depth below requirements of 1.6mm Tyres 26.08%
2 Brake pads less than 1.5 mm thick Brakes 14.52%
3 Condition has a cut in excess of the requirements deep enough to reach the ply or cords Tyres 9.43%
4 Joints constant velocity boot split or insecure, no longer prevents the ingress of dirt Body, chassis, structure 3.92%
5 Condition has ply or cords exposed Tyres 3.72%
6 Coil spring fractured or broken Suspension 3.51%

Shares are of all recorded failure items for this model, so they sum to less than 100% — a single failed test often records several defects, and the long tail below the top 6 is not shown.

What this means if you are buying one

Use it as a viewing checklist. If you are looking at a Peugeot 3008 Allure, these are the areas worth inspecting and worth asking about — and worth reading the car's own MOT history for, since a defect that keeps reappearing as an advisory is a better signal than any model-wide average.

The MOT record also has hard limits: it does not check the engine, clutch or gearbox, and it says nothing about outstanding finance, insurance write-off history, stolen markers or whether the mileage is genuine. Our used Peugeot 3008 Allure buying guide covers what to check beyond the MOT.

Checking a specific Peugeot 3008 Allure?

Enter its registration for finance, write-off, stolen, mileage and keeper history.

Free MOT history is available too — the £15 report adds finance, write-off, stolen and mileage checks.

Other Peugeot models

Peugeot 3008 Allure MOT FAQs

What does a Peugeot 3008 Allure most commonly fail its MOT on?

The single most recorded defect on Peugeot 3008 Allure cars failing their 2025 MOT was "tread depth tread depth below requirements of 1.6mm", appearing on 26.08% of failure items.

Does this mean my Peugeot 3008 Allure will fail?

No. This is what testers recorded across every Peugeot 3008 Allure that failed in 2025. It shows where this model tends to need attention, not the condition of any individual car. The Peugeot 3008 Allure passed 90.32% of its initial tests.

How do I see a specific Peugeot 3008 Allure's MOT history?

Enter its registration on our free MOT history check to see that car's own test results, advisories and recorded mileages.

See also: Peugeot 3008 Allure MOT pass rate · used Peugeot 3008 Allure buying guide · free MOT history check

Defect counts from the DVSA MOT Anonymised test-item data for 2025 (class 4 initial tests, failure items only — advisories and minor defects excluded), licensed under the Open Government Licence v3.0.