Mercedes-Benz EQA MOT pass rate and common problems

The Mercedes-Benz EQA passed 89.6% of its initial MOT tests in 2025, 17.3 percentage points above the 72.3% UK average. The item testers recorded most often was condition has a cut in excess of the requirements deep enough to reach the ply or cords.

Checking a specific car? Its own results, advisories and recorded mileages are in a free MOT history check.

How the EQA compares

Initial MOT tests in 2025, retests excluded. A car that failed and was repaired at the test station counts as a fail.

89.6%

Mercedes-Benz EQA

77.1%

Mercedes-Benz average

72.3%

UK average, all cars

The EQA runs 12.5 points ahead of the Mercedes-Benz average. It is 3rd of the 35 Mercedes-Benz models in the data. The average EQA arrived at its test 3.4 years old with 31,777 miles recorded.

A pass rate records whether cars met the roadworthiness standard on test day. It is not a reliability score, and part of any gap reflects how old the tested cars were.

EQA MOT pass rate by age

The same 2025 tests split by the car's age at test.

Age at testTestsPass ratevs UK average
3 to 5 years 5,885 90.9% 18.6 pts above

Every Mercedes-Benz EQA tested in 2025 was aged 3 to 5 years, so there is no other age group to compare with. The UK average of 72.3% covers cars of every age, so compare like with like.

Where EQA failures cluster

Every failure item recorded on Mercedes-Benz EQA cars in 2025, grouped into the DVSA's test areas.

  • Tyres63.8%
  • Visibility11.6%
  • Lamps, reflectors and electrical equipment9%
  • Suspension7%
  • Identification of the vehicle2.6%
  • Brakes2.2%

Tyres and visibility together account for 75.4% of recorded failure items. These are recorded failures across the model, not faults every car has.

The 10 most common EQA MOT failures

Specific items recorded on Mercedes-Benz EQA cars that failed their 2025 MOT, as a share of all recorded failure items.

  1. 1Condition has a cut in excess of the requirements deep enough to reach the ply or cordsTyres 31.2%
  2. 2Condition has ply or cords exposedTyres 13.2%
  3. 3Tread depth below requirements of 1.6mmTyres 12.7%
  4. 4Wipers does not clear the windscreen effectivelyVisibility 7.3%
  5. 5Linkage ball joints ball joint excessively wornSuspension 4.1%
  6. 6Headlamp aim too lowLamps, reflectors and electrical equipment 3.6%
  7. 7Headlamp aim too highLamps, reflectors and electrical equipment 3.2%
  8. 8Washers provides insufficient washer liquidVisibility 2.6%
  9. 9Ball joint excessively wornSuspension 2%
  10. 10Registration plates does not conform to the specified requirementsIdentification of the vehicle 2%

Together these 10 items make up 81.8% of everything testers recorded against failed Mercedes-Benz EQA cars. The rest is spread across many smaller items, and one failed test often records several at once.

What to look at on a EQA

The recorded failures above, grouped by area, biggest first.

1

Tyres

Recorded most often: condition has a cut in excess of the requirements deep enough to reach the ply or cords, condition has ply or cords exposed and tread depth below requirements of 1.6mm. 57.1% of failure items.

2

Visibility

Recorded most often: wipers does not clear the windscreen effectively and washers provides insufficient washer liquid. 9.9% of failure items.

3

Lamps, reflectors and electrical equipment

Recorded most often: headlamp aim too low and headlamp aim too high. 6.8% of failure items.

4

Suspension

Recorded most often: linkage ball joints ball joint excessively worn and ball joint excessively worn. 6.1% of failure items.

The car's own MOT history matters more than any model average. A free MOT history check shows whether a specific EQA has failed on these items before, or had them noted as advisories. Buying one? See the used Mercedes-Benz EQA buying guide.

Already found one?

Check its finance, write-off, theft, mileage and keeper history with a £15 vehicle history report.

Mercedes-Benz EQA MOT FAQs

What is the Mercedes-Benz EQA MOT pass rate?

89.6% of Mercedes-Benz EQA cars passed their initial MOT first time in 2025, from 9,850 tests. That is 17.3 percentage points above the 72.3% average for all cars, and ranks 47th of 575 models.

What does a Mercedes-Benz EQA most commonly fail its MOT on?

The item testers recorded most often on Mercedes-Benz EQA cars failing their 2025 MOT was condition has a cut in excess of the requirements deep enough to reach the ply or cords, on 31.2% of failure items. Next were condition has ply or cords exposed (13.2%) and tread depth below requirements of 1.6mm (12.7%).

Which area causes the most Mercedes-Benz EQA MOT failures?

Across every recorded failure item, the largest area was tyres at 63.8%, followed by visibility at 11.6%.

Does this mean every Mercedes-Benz EQA has these problems?

No. These are the items testers recorded across every Mercedes-Benz EQA that failed in 2025. They show where the model most often needs attention, not the condition of any individual car.

How do I see a specific Mercedes-Benz EQA's MOT history?

Enter its registration on the free Carpeep MOT history check to see that car's own test results, failures, advisories and recorded mileages.

MOT figures are aggregated from the DVSA MOT Anonymised data set for 2025: class 4 initial tests, retests excluded, with failure items from failed tests (advisories and minor defects excluded), licensed under the Open Government Licence v3.0. MOT results describe roadworthiness at test, not mechanical reliability.